The Ukhtysh ZVM-2410 tracked floating snow and swamp all-terrain vehicle is made on the basis of the original tracked chassis and has a 2-volume hooded body with a cargo-passenger compartment, unified with the UAZ-31512, UAZ-31514 vehicles. The all-terrain vehicle "Ukhtysh" is intended for mainly passenger transportation, as well as small luggage on all types of weak-bearing soils, swampy areas, afloat and virgin snow. The cargo-passenger cabin allows you to comfortably accommodate 5 people (including the driver) and cargo weighing up to 100 kg. If necessary, the rear seats of the Ukhtysh all-terrain vehicle can be transformed, creating additional luggage space. A distinctive feature of this model is the pneumo-mechanical drive for steering and brake control as standard.
Like all models of tracked snow and swamp-going vehicles, the vehicle is equipped with a bracket for installing an electric winch, a water pump (pump) and an evacuation hatch in the roof of the cabin. The chassis of the machine provides for the installation of several types of caterpillar tracks for different operating conditions.
Additional equipment for the all-terrain vehicle:
- Electric winch
- Autonomous interior heater
- Engine preheater
- Spotlight Finder
- Roof rack
- Air conditioner
- Kengurin with a branch breaker
- Painting in color
The cost of equipment and installation can be clarified by phone: 8 (920) 0582840 (WhatsApp, Telegram)
Photo and Video
The Ukhtysh ZVM-2410 tracked floating snow and swamp all-terrain vehicle is made on the basis of the original tracked chassis and has a 2-volume hooded body with a cargo-passenger compartment, unified with the UAZ-31512, UAZ-31514 vehicles. The all-terrain vehicle "Ukhtysh" is intended for mainly passenger transportation, as well as small luggage on all types of weak-bearing soils, swampy areas, afloat and virgin snow. The cargo-passenger cabin allows you to comfortably accommodate 5 people (including the driver) and cargo weighing up to 100 kg. If necessary, the rear seats of the Ukhtysh all-terrain vehicle can be transformed, creating additional luggage space. A distinctive feature of this model is the pneumo-mechanical drive for steering and brake control as standard.
Like all models of tracked snow and swamp-going vehicles, the vehicle is equipped with a bracket for installing an electric winch, a water pump (pump) and an evacuation hatch in the roof of the cabin. The chassis of the machine provides for the installation of several types of caterpillar tracks for different operating conditions.
Additional equipment for the all-terrain vehicle:
- Electric winch
- Autonomous interior heater
- Engine preheater
- Spotlight Finder
- Roof rack
- Air conditioner
- Kengurin with a branch breaker
- Painting in color
The cost of equipment and installation can be clarified by phone: 8 (920) 0582840 (WhatsApp, Telegram)
Specifications
| Modification |
ZVM-2410 |
||
|---|---|---|---|
| 1. General information | |||
| Maximum permissible weight/load capacity, kg |
|
3800/500 |
|
| Number of seats (with driver) |
|
5 |
|
| Average ground pressure with full load, kPa | 19.0 | ||
| Maximum speed, km/h | 50 | ||
| Speed afloat, km/h | 4-5 | ||
| Gas tank capacity, l (2x40) | 80 | ||
| Base, track, ground clearance, mm | 2500/1655/400 | ||
| 2. Dimensions, mm | |||
| Length / width / height, mm | 4195 / 2055 / 2050 | ||
| 3. Engine | |||
| Gasoline: ZMZ-409.10 | 150 hp | ||
| Diesel: Cummins ISF2.8 | 120 hp | ||
| 4. Transmission | |||
| Clutch | Single-disk, dry friction with hydraulic drive | ||
| Transmission | 5-speed, manual | ||
| Additional gearbox | Mechanical, 2-speed | ||
| main gear | Single stage, conical, with circular tooth | ||
| Final drive | Mechanical single-stage helical | ||
| Rotation mechanism | Onboard dry friction clutch, multi-disc with stopping band brake | ||
| Drive for controlling side clutches and stopping brakes | Mechanical with servo amplifier | ||
| Parking brake | Transmission, drum-block type, with manual drive | ||
| 5. Chassis, caterpillar propulsion | |||
| Suspension | Independent balanced torsion bar with shock absorbers on rollers 1 and 5 | ||
| Track rollers | Single full, 6 pcs. on Board | ||
| Support rollers | 3 pcs. on Board | ||
| Track tension mechanism | Torsion tension stabilization mechanism | ||
| Drive wheels | Rear-mounted with replaceable crowns | ||
| Track tension mechanism | Torsion tension stabilization mechanism | ||
| Track chain, width |
see track types 390-400 mm |
||
Our contractors
