for pricing
2.Displacement, l – 2.781
3.Power, kW (hp) – 110 (149.6)
4.Maximum torque, Nm – 330
Two-link floating snow and swamp-going vehicles - Unzha transporters of the especially high cross-country ability class with two active (driving) links, which have the best traction properties and the ratio of load capacity to dead weight. The first link houses the power plant and the passenger compartment with controls. The second link can have both passenger and cargo versions.
In the basic configuration, the Unzha tracked conveyor is equipped with an engine heater, a water pump, a bracket for a winch, and a hinged hatch.
Additional equipment for the all-terrain vehicle:
- Electric winch
- Autonomous interior heater
- Engine preheater
- Spotlight Finder
- Roof rack
- Air conditioner
- Kengurin with a branch breaker
- Painting in color
The cost of equipment and installation can be clarified by phone: 8 (920) 0582840 (WhatsApp, Telegram)
Photo and Video
Two-link floating snow and swamp-going vehicles - Unzha transporters of the especially high cross-country ability class with two active (driving) links, which have the best traction properties and the ratio of load capacity to dead weight. The first link houses the power plant and the passenger compartment with controls. The second link can have both passenger and cargo versions.
In the basic configuration, the Unzha tracked conveyor is equipped with an engine heater, a water pump, a bracket for a winch, and a hinged hatch.
Additional equipment for the all-terrain vehicle:
- Electric winch
- Autonomous interior heater
- Engine preheater
- Spotlight Finder
- Roof rack
- Air conditioner
- Kengurin with a branch breaker
- Painting in color
The cost of equipment and installation can be clarified by phone: 8 (920) 0582840 (WhatsApp, Telegram)
Specifications
| Modification | ZVM-3402 |
|---|---|
| 1.General information | |
| Curb weight, kg: | 4300 |
| - first section | 2700 |
| - second section | 1600 |
| Load capacity, kg: | 1500 |
| - first section | 500 |
| - second section | 1000 |
| Number of seats: | |
| - first section (with driver) | 5 |
| - second section | 10 |
| Total weight, kg | 5800 |
| Track, mm | 1650 |
| Ground clearance, mm | 400 |
| Length / width / height, mm | 7550/2100/2250 |
| Link base, mm: | |
| - first section | 2090 |
| - second section | 1500 |
| 2. Engine | |
| Model | CUMMINS ISF2.8 |
| Type | Diesel CR |
| Power, kW (hp) | 110 (149.6) |
| Torque N*m | 330 |
| Working volume, l | 2,781 |
| 3. Control system | |
| Rotation control | three-joint control unit with 2 hydraulic cylinders for turning |
| Turning pattern | Single-joint symmetrical |
| Brake system: | |
| - working | Hydraulic disc brakes on the second section |
| - parking brake | Drum-block with manual control in the first section |
| 4. Operating data | |
| Maximum speed on paved roads, km/h | 40 |
| Turning radius (at the center of the vehicle), m. | 6.2 |
| Average ground pressure with full load of the first/second section, kPa | 19.0/21.0 |
for pricing
2.Displacement, l – 2.781
3.Power, kW (hp) – 110 (149.6)
4.Maximum torque, Nm – 330
Modification:
Engine:
Caterpillar type:
Our contractors
