UZOLA
caterpillar snow and swamp vehicle
UNZHA
two-link caterpillar snow and swamp vehicle
UKHTYSH
caterpillar snow and swamp vehicle discontinued
VEYA
wheeled snow and swamp vehicle
SIVER
wheeled snow and swamp vehicle
ALL-TERRAIN VEHICLES
with rotary screw propeller TPP with RVD (screw drives)
Назад

18 November 2026

The capremont of the SUV "in the field": in 2026 this is more important than buying a new car

... views

Field overhaul of an off-road vehicle — ZVM Why it is now more cost-effective to maintain your equipment than to wait for a lower loan rate — or a Checklist for those who are not buying new but still want to keep moving.

The key rate is still high, loans are expensive, and many companies are postponing major purchases to 2027. An expensive machine is an investment decision — and investments are currently planned carefully.

But there is a second side to this pause that is discussed less often. If new machines are not being bought right now, it means the existing ones keep being operated. And this is where the conversation begins about repairs, components, and what matters more than the purchase price.

Components — in stock and on order
Consultations on urgent repair and replacement
of ZVM all-terrain vehicle units without waiting for delivery:
+7 (920) 058 2840
sales@zvm-nn.ru

What happens when the new-machine market "freezes"

As a manufacturer of off-road vehicles (ZVM), we see this in our incoming requests. In 2026, the share of secondary-market enquiries grew — used components, unit repairs, replacement of assemblies. This is not a "market decline." It is a restructuring: the customer is not ready to spend 10–15 million roubles on a new machine under an expensive loan, but is ready to invest in what is already running.

From the standpoint of enterprise economics, this is entirely rational. The cost of downtime in the field — when a machine breaks down at a site hundreds of kilometres from service — is higher than the cost of repair. And higher than the loan overpayment the customer "saved" by postponing the purchase.

That is why in 2026–2027 a field overhaul stops being a "forced measure" and becomes a normal part of planning. This article is about exactly that.

Why "in the field" is the key phrase

There is a difference between repairs at a service centre and repairs where the machine actually works. In the North, in a swamp, at a site that is hundreds of kilometres away along a winter road. And this difference determines which machine is worth buying at all — both in 2027 and in 2028.

Three things define field repairability:

First — component availability. If a unit can be replaced "with what you have," the machine keeps running. If every part is a factory order for a specific model, the machine is down for a month. ZVM's wheeled vehicles — VEYA and SIVER — were modernised in 2026, and one of the modernisation principles was precisely repairability and "arm's-length" components that can be found and replaced without waiting for a delivery.

Second — simplicity of design. The fewer units on a machine that cannot be repaired in the field, the lower the real cost of ownership.

Third — knowledge of the machine. A crew that understands how the off-road vehicle is built repairs it faster than someone seeing the diagram for the first time. This is where training, documentation, and the manufacturer's willingness to explain — not just sell — all matter.

Checklist: what to check before sending a machine in for repair

This is not a "repair manual" — these are the questions worth asking yourself and your supplier before making a decision.

  • What exactly failed — the unit or its consequence? Often "the engine broke" is a consequence of overheating, and overheating is a consequence of a clogged radiator. Repairing the consequence without the cause is money down the drain.
  • Is this component in stock at the manufacturer or its dealers? If not — how long is the wait, and can an equivalent be fitted.
  • Can the unit be replaced in the field, or does it require a stationary lift? This determines where the machine will be repaired and how long it will be out of service.
  • Which is cheaper — repair or write-off? Count not the cost of the part, but the cost of downtime plus repair plus the residual value of the machine. Sometimes a "cheap repair" turns out more expensive than selling for parts and buying another.
  • Who will do the repair? Your own crew, the manufacturer's mobile service, or a third-party team. Each option has its own price and its own timeline.

What this means for the manufacturer (and for us)

We handle secondary-market orders for used components. This is not our core business and not what we would ideally be doing. But it shows the market is alive. It has simply changed somewhat — the processes now centre on maintaining equipment rather than renewing it.

And this, by the way, is the answer to the question "what should a manufacturer do during this period." Don't wait for the customer to save up for a new machine. Help them maintain the one they have — and be the manufacturer they come back to for a new one when lending conditions become more comfortable.

Conclusion

If the budget for a new machine is being postponed — do not postpone maintenance. The cost of downtime in the field is higher than the cost of repair. And higher than the savings on a loan.

In the next article — what was actually purchased in 2026 under Federal Law 44-FZ and 223-FZ, and why dumping is not a strategy but a way to stay in the game.

ZVM Equipment Support

LLC "Zavod Vezdekhodnykh Mashin" (ZVM)
Consultations on maintaining your fleet of all-terrain vehicles

What is available
Component selection
and repair cost estimate for your specific task
+7 (920) 058 2840 (MAX, Telegram)

Contact us