for pricing



2.Displacement, l - 2.693
3.Power, kW (hp) - 110 (149.6)
4.Maximum torque, Nm - 235

2.Displacement, l – 2.781
3.Power, kW (hp) – 110 (149.6)
4.Maximum torque, Nm – 330

ZVM-39082 VEYA 6×6
The ZVM-39082 VEYA 6×6 is an all-wheel-drive amphibious off-road vehicle designed to transport people, equipment, and cargo over difficult terrain. Oversized low-pressure tyres, three driven axles, and portal axles help it handle challenging route sections. A payload capacity of up to 2,000 kg allows it to deliver not only work crews but also the necessary equipment and materials to remote facilities.
1. Six Driven Wheels — Confident Movement Over Difficult Terrain
The 6×6 wheel configuration gives the vehicle six points of support and distributes the load between the three axles.
The front and middle axles are driven through a lockable inter-axle differential, and the rear axle is connected when needed. This arrangement helps realise the vehicle's traction capabilities on difficult sections and adapt the transmission to driving conditions.
VEYA is designed for operation in deep snow, on swamps, peat bogs, sand, and cross-country terrain — where conventional transport loses mobility.
2. 1680×700 mm Tyres — A Large Support Area on Weak Soil
Oversized low-pressure tyres are one of the key advantages of this modification.
The 1680×700 mm size provides a large contact area with the surface. The load is distributed over the ground, specific pressure is reduced, and the risk of sinking on weak-bearing sections becomes lower.
This is especially important when driving through virgin snow, swamps, peat bogs, and sand. Combined with portal axles and high ground clearance, the tyres help VEYA overcome difficult sections of the route.
3. VEYA — An Amphibious Off-Road Vehicle
Rivers, lakes, and swampy areas do not necessarily become an obstacle to continuing the route. VEYA belongs to the class of amphibious off-road vehicles and is capable of moving on water.
Its amphibious capability expands operating possibilities in areas with a large number of water obstacles and flooded sections. The speed afloat is 2–3 km/h.
4. Portal Axles and a Design Built for Off-Road Use
At the heart of the vehicle are a steel ladder-type frame and portal axles with original wheel reduction gears.
The portal design allows ground clearance to be increased and helps overcome deep ruts, terrain irregularities, and other obstacles. The removable wheel reduction gears account for the vehicle's maintenance and repair requirements.
Combined with the oversized tyres and the six-wheel layout, this forms the basis of the vehicle's high mobility.
5. Power and Transmission for Serious Loads
VEYA is offered with a petrol or diesel engine with a power output of 149.6 hp.
Depending on the configuration, the following are available:
- petrol engine ZMZ PRO;
- diesel engine GAZ G31C.
The 6-speed manual gearbox works in tandem with a 2-speed transfer case. The inter-axle differential of the front and middle axle drive has a lock, and the rear axle is connected when needed.
This transmission allows the driving mode to be selected according to the terrain, soil type, and vehicle load.
6. Spacious Body for Crew and Equipment
VEYA 6×6 is designed to accommodate from 2 to 10 people, depending on the version.
The all-metal three-door body with a roof hatch is suitable for passenger and passenger-and-cargo use. Cabin insulation, heating equipment, and climate control help maintain comfortable conditions during prolonged operation in cold weather.
The cargo compartment has storage lockers for belongings and equipment.
7. Up to 2 Tonnes of Cargo — More Capability for Industrial Tasks
One of the main advantages of the ZVM-39082 is its high payload for an off-road vehicle of this class.
Depending on the surface type, the vehicle can carry:
- up to 2,000 kg — on firm ground;
- up to 1,500 kg — on weak-bearing soils and afloat.
This allows work crews, equipment, tools, materials, and other necessary cargo to be delivered to remote facilities. The vehicle is suitable for tasks where it is important not only to reach the site but also to bring everything needed for the work.
8. Equipment for Operating Conditions
The standard configuration includes equipment for comfortable and safe crew operation:
- autonomous liquid engine preheater for diesel versions;
- additional liquid passenger cabin heater;
- driver's seat with suspension system;
- climate control;
- roof hatch;
- multimedia system;
- driver and front passenger airbags;
- electric heating of the windshield and side mirrors;
- electric heating of the driver's seat and steering wheel;
- power windows for the front doors;
- tilt-adjustable steering column;
- cabin insulation;
- storage lockers in the cargo compartment.
Optional equipment available:
- electric winch;
- central tyre inflation system;
- autonomous cabin heater;
- searchlight;
- roof rack;
- bull bar with branch guards;
- air intake (snorkel);
- GLONASS/GPS satellite navigation equipment;
- fuel system heating equipment.
The configuration is selected according to the vehicle's purpose and operating conditions.
9. Applications
ZVM-39082 VEYA 6×6 is suitable for tasks that require transporting people, equipment, and significant cargo along routes without road infrastructure.
Oil, Gas, and Energy Industries
Delivery of personnel, equipment, and materials to remote facilities.
Geological Exploration and Expeditions
Transportation of research teams across hard-to-reach territories.
Servicing Remote Facilities
Regular trips to production sites outside the road network.
Forestry and Agriculture
Work in areas where conventional machinery cannot pass.
Environmental Organizations and Nature Reserves
Patrolling and monitoring of hard-to-reach territories.
Search-and-Rescue and Emergency Services
Access to areas cut off from the road network.
10. Technical Specifications
| Model | ZVM-39082 VEYA |
| Wheel configuration | 6×6 |
| Vehicle type | Wheeled amphibious off-road vehicle |
| Engine | Petrol ZMZ PRO / diesel GAZ G31C |
| Engine power | 149.6 hp |
| Gearbox | Manual, 6-speed |
| Transfer case | Manual, 2-speed |
| Tyre size | 1680×700 mm |
| Tyre type | Low-pressure |
| Ground clearance | from 700 mm |
| Number of seats | 2–10 |
| Maximum permissible weight on firm ground | 6,000 kg |
| Payload on firm ground | up to 2,000 kg |
| Maximum permissible weight on weak-bearing soils and afloat | 5,500 kg |
| Payload on weak-bearing soils and afloat | up to 1,500 kg |
| Overall dimensions (L×W×H) | 6,880×2,540×3,300 mm |
| Maximum speed on highway | 50 km/h |
| Speed afloat | 2–3 km/h |
| Gradability at full load | up to 35° |
| Permissible lateral roll without load | up to 20° |
| Minimum turning radius | 11 m |
ZVM-39082 VEYA 6×6 vs. TREKOL HUSKY 6×6: Comparing Specifications
Both vehicles belong to the class of three-axle off-road vehicles and are intended for transporting people and cargo over difficult terrain. Let us compare the main parameters that help evaluate their capabilities for professional use.
| Parameter | ZVM-39082 VEYA | TREKOL HUSKY |
|---|---|---|
| Wheel configuration | 6×6 | 6×6 |
| Number of seats | 2–10 | 8 or 14 |
| Tyre size / wheel diameter | 1680×700 mm | diameter 1650 mm |
| Ground clearance | from 700 mm | 550 mm |
| Gearbox | Manual, 6-speed | Manual, 6-speed |
| Payload on firm ground | up to 2,000 kg | up to 2,000 kg |
| Payload on weak-bearing soils | up to 1,500 kg | up to 1,500 kg |
| Maximum speed on highway | up to 50 km/h | up to 50 km/h |
| Speed afloat | 2–3 km/h | up to 1 km/h |
What Makes the ZVM-39082 VEYA Stand Out?
According to published specifications, both vehicles have comparable payload capacities and are designed to transport people and equipment off-road.
VEYA stands out with its 1680×700 mm tyres, portal axles, and the ability to accommodate up to 10 people. TREKOL HUSKY offers an 8- or 14-seat version, an aluminium insulated body, and its own chassis design.
When choosing, it is worth considering not only payload capacity but also wheel size, ground clearance, capacity, body design, and route specifics.
Configure VEYA for Your Tasks
Tell Zavod Vezdekhodnykh Mashin specialists where you plan to operate the off-road vehicle and what tasks it should perform. We will help you select the engine, configuration, and additional equipment based on your operating conditions.
ZVM-39082 VEYA 6×6 — for delivering people and cargo where conventional roads end.
国际合作伙伴联系方式
俄罗斯全地形车辆制造厂(ZVM)欢迎与海外企业、经销商及最终客户开展合作。
电话:+7 920 058-28-40
电子邮箱:sales@zvm-nn.ru
微信(WeChat):wxid_dhdqihdmcn5w22
Photo and Video
ZVM-39082 VEYA 6×6
The ZVM-39082 VEYA 6×6 is an all-wheel-drive amphibious off-road vehicle designed to transport people, equipment, and cargo over difficult terrain. Oversized low-pressure tyres, three driven axles, and portal axles help it handle challenging route sections. A payload capacity of up to 2,000 kg allows it to deliver not only work crews but also the necessary equipment and materials to remote facilities.
1. Six Driven Wheels — Confident Movement Over Difficult Terrain
The 6×6 wheel configuration gives the vehicle six points of support and distributes the load between the three axles.
The front and middle axles are driven through a lockable inter-axle differential, and the rear axle is connected when needed. This arrangement helps realise the vehicle's traction capabilities on difficult sections and adapt the transmission to driving conditions.
VEYA is designed for operation in deep snow, on swamps, peat bogs, sand, and cross-country terrain — where conventional transport loses mobility.
2. 1680×700 mm Tyres — A Large Support Area on Weak Soil
Oversized low-pressure tyres are one of the key advantages of this modification.
The 1680×700 mm size provides a large contact area with the surface. The load is distributed over the ground, specific pressure is reduced, and the risk of sinking on weak-bearing sections becomes lower.
This is especially important when driving through virgin snow, swamps, peat bogs, and sand. Combined with portal axles and high ground clearance, the tyres help VEYA overcome difficult sections of the route.
3. VEYA — An Amphibious Off-Road Vehicle
Rivers, lakes, and swampy areas do not necessarily become an obstacle to continuing the route. VEYA belongs to the class of amphibious off-road vehicles and is capable of moving on water.
Its amphibious capability expands operating possibilities in areas with a large number of water obstacles and flooded sections. The speed afloat is 2–3 km/h.
4. Portal Axles and a Design Built for Off-Road Use
At the heart of the vehicle are a steel ladder-type frame and portal axles with original wheel reduction gears.
The portal design allows ground clearance to be increased and helps overcome deep ruts, terrain irregularities, and other obstacles. The removable wheel reduction gears account for the vehicle's maintenance and repair requirements.
Combined with the oversized tyres and the six-wheel layout, this forms the basis of the vehicle's high mobility.
5. Power and Transmission for Serious Loads
VEYA is offered with a petrol or diesel engine with a power output of 149.6 hp.
Depending on the configuration, the following are available:
- petrol engine ZMZ PRO;
- diesel engine GAZ G31C.
The 6-speed manual gearbox works in tandem with a 2-speed transfer case. The inter-axle differential of the front and middle axle drive has a lock, and the rear axle is connected when needed.
This transmission allows the driving mode to be selected according to the terrain, soil type, and vehicle load.
6. Spacious Body for Crew and Equipment
VEYA 6×6 is designed to accommodate from 2 to 10 people, depending on the version.
The all-metal three-door body with a roof hatch is suitable for passenger and passenger-and-cargo use. Cabin insulation, heating equipment, and climate control help maintain comfortable conditions during prolonged operation in cold weather.
The cargo compartment has storage lockers for belongings and equipment.
7. Up to 2 Tonnes of Cargo — More Capability for Industrial Tasks
One of the main advantages of the ZVM-39082 is its high payload for an off-road vehicle of this class.
Depending on the surface type, the vehicle can carry:
- up to 2,000 kg — on firm ground;
- up to 1,500 kg — on weak-bearing soils and afloat.
This allows work crews, equipment, tools, materials, and other necessary cargo to be delivered to remote facilities. The vehicle is suitable for tasks where it is important not only to reach the site but also to bring everything needed for the work.
8. Equipment for Operating Conditions
The standard configuration includes equipment for comfortable and safe crew operation:
- autonomous liquid engine preheater for diesel versions;
- additional liquid passenger cabin heater;
- driver's seat with suspension system;
- climate control;
- roof hatch;
- multimedia system;
- driver and front passenger airbags;
- electric heating of the windshield and side mirrors;
- electric heating of the driver's seat and steering wheel;
- power windows for the front doors;
- tilt-adjustable steering column;
- cabin insulation;
- storage lockers in the cargo compartment.
Optional equipment available:
- electric winch;
- central tyre inflation system;
- autonomous cabin heater;
- searchlight;
- roof rack;
- bull bar with branch guards;
- air intake (snorkel);
- GLONASS/GPS satellite navigation equipment;
- fuel system heating equipment.
The configuration is selected according to the vehicle's purpose and operating conditions.
9. Applications
ZVM-39082 VEYA 6×6 is suitable for tasks that require transporting people, equipment, and significant cargo along routes without road infrastructure.
Oil, Gas, and Energy Industries
Delivery of personnel, equipment, and materials to remote facilities.
Geological Exploration and Expeditions
Transportation of research teams across hard-to-reach territories.
Servicing Remote Facilities
Regular trips to production sites outside the road network.
Forestry and Agriculture
Work in areas where conventional machinery cannot pass.
Environmental Organizations and Nature Reserves
Patrolling and monitoring of hard-to-reach territories.
Search-and-Rescue and Emergency Services
Access to areas cut off from the road network.
10. Technical Specifications
| Model | ZVM-39082 VEYA |
| Wheel configuration | 6×6 |
| Vehicle type | Wheeled amphibious off-road vehicle |
| Engine | Petrol ZMZ PRO / diesel GAZ G31C |
| Engine power | 149.6 hp |
| Gearbox | Manual, 6-speed |
| Transfer case | Manual, 2-speed |
| Tyre size | 1680×700 mm |
| Tyre type | Low-pressure |
| Ground clearance | from 700 mm |
| Number of seats | 2–10 |
| Maximum permissible weight on firm ground | 6,000 kg |
| Payload on firm ground | up to 2,000 kg |
| Maximum permissible weight on weak-bearing soils and afloat | 5,500 kg |
| Payload on weak-bearing soils and afloat | up to 1,500 kg |
| Overall dimensions (L×W×H) | 6,880×2,540×3,300 mm |
| Maximum speed on highway | 50 km/h |
| Speed afloat | 2–3 km/h |
| Gradability at full load | up to 35° |
| Permissible lateral roll without load | up to 20° |
| Minimum turning radius | 11 m |
ZVM-39082 VEYA 6×6 vs. TREKOL HUSKY 6×6: Comparing Specifications
Both vehicles belong to the class of three-axle off-road vehicles and are intended for transporting people and cargo over difficult terrain. Let us compare the main parameters that help evaluate their capabilities for professional use.
| Parameter | ZVM-39082 VEYA | TREKOL HUSKY |
|---|---|---|
| Wheel configuration | 6×6 | 6×6 |
| Number of seats | 2–10 | 8 or 14 |
| Tyre size / wheel diameter | 1680×700 mm | diameter 1650 mm |
| Ground clearance | from 700 mm | 550 mm |
| Gearbox | Manual, 6-speed | Manual, 6-speed |
| Payload on firm ground | up to 2,000 kg | up to 2,000 kg |
| Payload on weak-bearing soils | up to 1,500 kg | up to 1,500 kg |
| Maximum speed on highway | up to 50 km/h | up to 50 km/h |
| Speed afloat | 2–3 km/h | up to 1 km/h |
What Makes the ZVM-39082 VEYA Stand Out?
According to published specifications, both vehicles have comparable payload capacities and are designed to transport people and equipment off-road.
VEYA stands out with its 1680×700 mm tyres, portal axles, and the ability to accommodate up to 10 people. TREKOL HUSKY offers an 8- or 14-seat version, an aluminium insulated body, and its own chassis design.
When choosing, it is worth considering not only payload capacity but also wheel size, ground clearance, capacity, body design, and route specifics.
Configure VEYA for Your Tasks
Tell Zavod Vezdekhodnykh Mashin specialists where you plan to operate the off-road vehicle and what tasks it should perform. We will help you select the engine, configuration, and additional equipment based on your operating conditions.
ZVM-39082 VEYA 6×6 — for delivering people and cargo where conventional roads end.
国际合作伙伴联系方式
俄罗斯全地形车辆制造厂(ZVM)欢迎与海外企业、经销商及最终客户开展合作。
电话:+7 920 058-28-40
电子邮箱:sales@zvm-nn.ru
微信(WeChat):wxid_dhdqihdmcn5w22
Specifications
| Parameter | ZVM-39082 6×6 |
|---|---|
| General Data | |
| Designation | ZVM-39082 |
| Wheel arrangement | 6×6 |
| Maximum permissible weight / payload capacity | |
| — on firm ground, kg | 6,000 / 2,000 |
| — on weak-bearing soils and afloat, kg | 5,500 / 1,500 |
| Wheelbase (to rear axle) / track / ground clearance, mm | 4,750 / 1,800 / from 700 |
| Overall dimensions: length / width / height, mm | 6,880 / 2,540 / 3,300 |
| Body | |
| Body type | All-metal 3-door with roof hatch |
| Number of seats in the cabin, including driver (available configurations) | 2–10 |
| Engine | |
| Petrol: ZMZ-PRO (ZMZ 409051.10 or 409052.10) | 149.6 hp |
| Diesel: GAZ G31C | 149.6 hp |
| Transmission | |
| Clutch | Single-plate, dry-friction, hydraulically operated |
| Gearbox | Mechanical 6-speed synchronized |
| Transfer case | Mechanical 2-speed with lockable symmetrical bevel inter-axle differential (driving front and middle axles) and engageable rear-axle drive |
| Final drive | Bevel, hypoid with symmetrical bevel differential |
| Wheel hub reduction gear | Mechanical single-stage reduction gear |
| Axles | Portal type with detachable wheel reduction gears |
| Chassis | |
| Suspension | Longitudinal semi-elliptical leaf springs with a stabilizer bar and telescopic shock absorbers |
| Control Systems | |
| Steering | Steering mechanism with power steering and a hydraulic cylinder actuating the front axle steering linkage |
| Brakes | Service brake system with wheel drum brakes and a hydraulic actuator with a vacuum booster; electrically operated drum-and-shoe transmission parking brake |
| Tyres | |
| Size | 1680×700 mm |
| Type | Low-pressure |
| Rims | Welded steel with clamping rings |
| Maximum Speed, km/h | |
| — on-road | 50 |
| — afloat | 2–3 |
| Obstacle Negotiation on Firm Ground | |
| — gradient (fully loaded) | 35° |
| — side slope (unloaded) | 20° |
| Minimum turning radius (outer front wheel track) | 11 m |
for pricing



2.Displacement, l - 2.693
3.Power, kW (hp) - 110 (149.6)
4.Maximum torque, Nm - 235

2.Displacement, l – 2.781
3.Power, kW (hp) – 110 (149.6)
4.Maximum torque, Nm – 330

Modification:
Engine:
Caterpillar type: