ZVM-2902 — Transport and Technological Platform with Rotary-Screw Propulsion

ZVM-2902 is a heavy amphibious all-terrain vehicle with rotary-screw propulsion for transporting people, cargo, and special equipment across swamps, low-bearing soils, virgin snow, and water areas.

The machine is designed for operation where conventional motor transport does not provide the necessary cross-country capability. The ZVM-2902 combines the functions of an all-terrain vehicle and a mobile technological platform, allowing equipment to be delivered directly to the work site.

A payload capacity of up to 2000 kg, buoyancy, and the ability to install technological equipment make the ZVM-2902 a solution for heavy operating conditions.

When the ZVM-2902 is needed

The ZVM-2902 is designed for operation in areas where there is no full road infrastructure or where conventional machinery has traction limitations.

• swampy and waterlogged terrain;
• low-bearing and waterlogged soils;
• virgin snow;
• areas with large amounts of water;
• hard-to-reach areas without roads;
• remote industrial and technological facilities;
• areas where heavy equipment needs to be transported.

Up to 2 tonnes of cargo or equipment

One of the key advantages of the ZVM-2902 is the ability to transport up to 2000 kg of cargo or technological equipment.

This allows the machine to be used not only as transport for personnel and cargo but also as a basis for creating a specialized mobile complex.

The platform can accommodate equipment necessary for performing work directly at the site.

An all-terrain vehicle and a working platform in one machine

The ZVM-2902 is designed as a transport and technological platform. This means that its capabilities are not limited to cargo delivery.

Depending on the task, special technological equipment can be installed on the machine.

• manipulator;
• excavator equipment;
• soil pump;
• water pumping equipment;
• other special equipment according to the customer's technical specification.

The ZVM-2902 can be adapted to a specific technological process, turning the all-terrain vehicle into a mobile working machine.

Rotary-screw propulsion for difficult off-road conditions

The ZVM-2902 design uses rotary-screw propulsors. This scheme allows the machine to move over surfaces where the use of standard wheeled transport is significantly limited.

The all-terrain vehicle is designed for operation in swamps, low-bearing soils, virgin snow, and water areas.

• Swamp — operation on swampy and waterlogged terrain.
• Low-bearing soil — operation on difficult soils outside prepared roads.
• Snow — movement through virgin snow.
• Water — ability to move afloat.

Advantages of the ZVM-2902

• Payload capacity up to 2000 kg. Ability to transport a significant amount of cargo or install heavy technological equipment.
• Buoyancy. The machine is capable of moving on water.
• Rotary-screw propulsion. Designed for operation in swamps, low-bearing soils, snow, and water areas.
• Technological platform. Ability to install special equipment.
• Power take-off shaft. Allows the use of a drive for technological equipment from the power unit.
• Bilge pump. Included in the standard configuration.
• Engine heater. Included in the standard configuration.
• Individual configuration. Equipment can be selected for the tasks of a specific customer.

Which industries the ZVM-2902 is suitable for

Construction

Delivery of materials, equipment, and specialists to construction sites located in hard-to-reach areas.

Land reclamation works

Use of specialized machinery in swamps, waterlogged and low-bearing soils.

Emergency rescue operations

Delivery of people and equipment to areas where access for conventional transport is difficult.

Industrial infrastructure

Maintenance of remote facilities, delivery of equipment, and performance of technological operations directly on site.

Work in remote areas

Transportation of cargo and equipment across territories with minimal road infrastructure.

Special technological tasks

Use of the platform as a basis for installing equipment necessary for a specific production process.

Standard equipment

In the standard configuration, the ZVM-2902 is equipped with:

• two-seat cabin;
• power take-off shaft for driving technological equipment;
• bilge pump;
• engine heater.

The composition of optional equipment is determined by the machine's purpose and the customer's requirements.

Engine

The ZVM-2902 is equipped with a diesel engine. The technical documentation for the model provides the following power unit options:

• YaMZ-5344 — power 99.2 kW (134.9 hp), maximum torque 421 N·m;
• MMZ D245.7 — power 87.5 kW (119 hp), maximum torque 420 N·m.

The specific configuration of the power unit is determined when ordering the machine.

Technical specifications of the ZVM-2902

Configuration according to technical specification

For industrial operation, it is important to select not only the basic machine but also the equipment in accordance with the specific working conditions.

When choosing the ZVM-2902, it is recommended to take into account:

• type and condition of the soil;
• presence of water areas;
• operating conditions in winter;
• weight of cargo transported;
• number of people transported;
• type of equipment installed;
• weight of technological equipment;
• need for equipment drive from the engine.

Based on these parameters, specialists can select the ZVM-2902 configuration for a specific task.

Why the ZVM-2902 is more than an all-terrain vehicle

When working in remote areas, the cost of delivering equipment and organizing work is often determined not by distance but by the ability to physically reach the site.

The ZVM-2902 is designed specifically for such conditions. The rotary-screw propulsion allows the machine to be used in swamps, low-bearing soils, virgin snow, and water areas, while a payload capacity of up to 2000 kg allows heavy equipment to be transported.

If necessary, the machine can perform the function of a mobile technological platform.

This allows transport and technological tasks to be solved on a single base.

ZVM-2902 for heavy operating conditions

Choose the ZVM-2902 if you need to:

• transport up to 2000 kg of cargo or equipment;
• work in swamps and on low-bearing soils;
• move through virgin snow;
• overcome water areas;
• deliver equipment to remote facilities;
• use the all-terrain vehicle as a basis for a special technological complex.

The ZVM-2902 is a transport and technological platform for tasks where conventional machinery is not enough.

Order the ZVM-2902

Provide specialists with information about where the machine will operate, what cargo needs to be transported, and what equipment needs to be installed.

Based on this data, the appropriate configuration of the ZVM-2902 can be selected and a commercial proposal prepared.